سؤال من فضلكم

يمكن ذلك عن طريق اداة الوينسك

ويمكنك القراء اكثر حول هذا الادة فهي فعلا رائعة

وهذا الكود الخاص بعملية الارسال

Dim Response As String, Reply As Integer, DateNow As String
Dim first As String, Second As String, Third As String
Dim Fourth As String, Fifth As String, Sixth As String
Dim Seventh As String, Eighth As String
Dim Start As Single, Tmr As Single



Sub SendEmail(MailServerName As String, FromName As String, FromEmailAddress As String, ToName As String, ToEmailAddress As String, EmailSubject As String, EmailBodyOfMessage As String)

Winsock1.LocalPort = 0 ' Must set local port to 0 (Zero) or you can only send 1 e-mail pre program start

If Winsock1.State = sckClosed Then ' Check to see if socet is closed
DateNow = Format(Date, "Ddd") & ", " & Format(Date, "dd Mmm YYYY") & " " & Format(Time, "hh:mm:ss") & "" & " -0600"
first = "mail from:" + Chr(32) + FromEmailAddress + vbCrLf ' Get who's sending E-Mail address
Second = "rcpt to:" + Chr(32) + ToEmailAddress + vbCrLf ' Get who mail is going to
Third = "Date:" + Chr(32) + DateNow + vbCrLf ' Date when being sent
Fourth = "From:" + Chr(32) + FromName + vbCrLf ' Who's Sending
Fifth = "To:" + Chr(32) + ToNametxt + vbCrLf ' Who it going to
Sixth = "Subject:" + Chr(32) + EmailSubject + vbCrLf ' Subject of E-Mail
Seventh = EmailBodyOfMessage + vbCrLf ' E-mail message body
Ninth = "mouse mailer" + vbCrLf ' What program sent the e-mail, customize this
Eighth = Fourth + Third + Ninth + Fifth + Sixth ' Combine for proper SMTP sending

Winsock1.Protocol = sckTCPProtocol ' Set protocol for sending
Winsock1.RemoteHost = MailServerName ' Set the server address
Winsock1.RemotePort = 25 ' Set the SMTP Port
Winsock1.Connect ' Start connection

WaitFor ("220")

StatusTxt.Caption = "Connecting...."
StatusTxt.Refresh

Winsock1.SendData ("HELO worldcomputers.com" + vbCrLf)

WaitFor ("250")

StatusTxt.Caption = "Connected"
StatusTxt.Refresh

Winsock1.SendData (first)

StatusTxt.Caption = "Sending Message"
StatusTxt.Refresh

WaitFor ("250")

Winsock1.SendData (Second)

WaitFor ("250")

Winsock1.SendData ("data" + vbCrLf)

WaitFor ("354")


Winsock1.SendData (Eighth + vbCrLf)
Winsock1.SendData (Seventh + vbCrLf)
Winsock1.SendData ("." + vbCrLf)

WaitFor ("250")

Winsock1.SendData ("quit" + vbCrLf)

StatusTxt.Caption = "Disconnecting"
StatusTxt.Refresh

WaitFor ("221")

Winsock1.Close
Else
MsgBox (Str(Winsock1.State))
End If

End Sub
Sub WaitFor(ResponseCode As String)
Start = Timer ' Time event so won't get stuck in loop
While Len(Response) = 0
Tmr = Start - Timer
DoEvents ' Let System keep checking for incoming response **IMPORTANT**
If Tmr > 50 Then ' Time in seconds to wait
MsgBox "SMTP service error, timed out while waiting for response", 64, MsgTitle
Exit Sub
End If
Wend
While Left(Response, 3) <> ResponseCode
DoEvents
If Tmr > 50 Then
MsgBox "SMTP service error, impromper response code. Code should have been: " + ResponseCode + " Code recieved: " + Response, 64, MsgTitle
Exit Sub
End If
Wend
Response = "" ' Sent response code to blank **IMPORTANT**
End Sub


Private Sub Command1_Click()
SendEmail txtEmailServer.Text, txtFromName.Text, txtFromEmailAddress.Text, txtToEmailAddress.Text, txtToEmailAddress.Text, txtEmailSubject.Text, txtEmailBodyOfMessage.Text
MsgBox ("Mail Sent")
StatusTxt.Caption = "Mail Sent"
StatusTxt.Refresh
Beep

Close
End Sub

Private Sub Command2_Click()

End

End Sub

Private Sub Winsock1_DataArrival(ByVal bytesTotal As Long)

Winsock1.GetData Response ' Check for incoming response *IMPORTANT*

End Sub

والله واعلم ;)