تحميل جهاز بويندوز 2000

Windows 2000 Pro/Server Install

These directions are for the NOS class at Albuquerque TVI

Special thanks to Scott Chille for his help in creating this procedure

Introduction:

Windows 2000 installation can be simple and straightforward.

Unfortunately, our shared lab environment requires that we take additional steps to ensure that each student derives the maximum benefit from the installation lab. To achieve this end, we have assembled these directions to ensure successful installation.

Failure to adhere to these directions will likely result in a disaster of epic proportions

Keep in mind that the directions are not a substitute for thought, and as you follow them, you ought to ask your instructor to explain directions that are unclear or are not intuitive.

There may be differences in the directions depending on which OS you are installing (Windows 2000 Server or Windows 2000 Pro). The differences will be illustrated clearly.

1) Boot Windows 98

2) Click Start - Shutdown - Restart in MS-DOS Mode

3) When the system reboots, you will see a DOS prompt (c:>)

4) At this prompt, type the following

if you are installing Windows 2000 Pro:

cdw2kpro

dir *.exe

winnt /s c:w2kpro

if you are installing Windows 2000 Server:

cdw2kserv

dir *.exe

winnt /s c:w2kserv

5) Follow the on screen instructions until you are prompted to restart the computer.

6) The computer will reboot and automatically enter the Windows 2000 setup. You will be prompted to "Press Enter to setup Windows 2000"

7) Press the 'F8' key to accept the End User License Agreement (EULA). This lab is licensed for 25 simultaneous copies of Windows 2000 Server and unlimited copies of Windows 2000 Pro. It is important that we do not abuse this license agreement by using the software outside the lab.

8) This step needs to be performed only if another instance of Windows 2000 is present on the machine.

If this is NOT the first Windows 2000 install on the machine, then you will be prompted to repair an install.

Press 'ESC' key to get the option to install in a different directory.

Choose 'Clean Install'.

9) You must now choose the partition that is reserved for your class for the installation.

Your answer will be dependent upon which instructor you have for NOS.

For example, if you are a student in Dave Clauss's NOS class, you will select the partition labeled 'Clauss'.

!!!!!!!!!!DO NOT INSTALL ON THE c:win95 PARTITION!!!!!!!!!!

10) Convert the partition to NTFS - Press 'C' to convert or ESC to change your mind.

Setup will now copy files to the correct install folders.

The computer will reboot when finished copying.

When the computer reboots, it will automatically load your installation of Windows 2000.

Upon boot, the computer will convert the file system to NTFS

11) Windows 2000 will now finish setting up. - Click 'Next' when prompted and allow Windows 2000 to detect and install devices.

12) Windows 2000 will prompt you for your Name and Company Name. If you want to get creative here, feel free, otherwise, enter 'Networking Lab' for name and 'TVI' for company.

13) When prompted for your product key, type the following

If you are installing Windows 2000 Pro:

WC3C6-37C3B-KJXKR-DBXCC-QT878

If you are installing Windows 2000 Server:

J6CVM-3GCQ2-PDCB3-WB8XY-C4WMG14) When prompted for Computer Name, enter the first letter of your instructors name + the TVI Inventory number of the computer

(The label can be found on the right hand side of the Dell system).

For example, if your instructor is Vargas and the blue inventory label reads 738715, enter V738715 for Computer Name

For the password, enter the semester and four-digit year in lowercase letters.

Computers that do not conform to this standard WILL BE ERASED

For example, if you are taking NOS in the fall of 2001 enter 'fall2001' as your password.

15) If you are prompted for components to install (Windows 2000 Server), deselect IIS and Indexing Service. Leave all other settings unchanged and click 'next'.

16) Set Time Zone to Mountain. If this is a server install, select 5 as the number of client connections

17) Next, you will configure the network. Select 'Typical Settings'

(This option includes Client for Microsoft Networks, TCP/IP, and File and Printer Sharing).

18) When prompted for Workgroup or Computer Domain, Select, "No, this computer is not on the network, or is on a network without a domain controller.

Enter TVINORTH as your workgroup.

19) If you are installing Windows 2000 Server, do the following:

Wait while setup finishes installing. - Click finish when prompted.

20) If you are installing Windows 2000 Pro, do the following:

Select "Users must log into this machine" - next - finish

21) When the computer reboots, you must log in using the username 'Administrator' and the password '' that was entered previously.

22) Next, we will set the default OS back to Microsoft Windows.

To do this, right click on the 'My Computer' Icon and left click on the 'Properties' option.

In the new window that appears, click on the advanced tab.

Click the button labeled 'Startup and Recovery'.

Change Default OS value to "Microsoft Windows" using the pull down list.

Click OK - OK

23) This final set of steps are perhaps the most difficult, and the most important. In this step, our objective is to label our installation of Windows 2000 in the boot.ini file to avoid confusion among the many installs of Windows 2000 in various sections of NOS

To complete this step, do the following.

i. Click start - run

ii. type cmd and press enter

iii. In the DOS window, type the following:

1. c:

2. cd

3. attrib -s -h -r boot.ini

4. edit boot.ini

24) At this point, you should be looking at a blue screen with the contents of your boot.ini file. If not, alert your instructor that you need help.

Once inside the editor, use the arrow keys to position your cursor before the text that reads "Microsoft Windows 2000 Server". Insert your instructors name and a dash at that point.

When finished, the text should read:

"Clauss - Microsoft Windows 2000 Server" if your instructor is Clauss,

"Hart - Microsoft Windows 2000 Server" if your instructor is Hart, or

"Vargas - Microsoft Windows 2000 Server" if your instructor is Vargas.

25) Once your instructor has verified the text, press the ALT + F key, then press S for Save.

Next, Press ALT + F, then press X for Exit.

26) Back at the dos prompt, type the following:

Attrib +s +h +r boot.ini

exit

26) Reboot the machine and select your installation (ie "Clauss - Microsoft Windows 2000 Pro") within 30 seconds after being prompted.

27) If the machine successfully boots, log in as administrator and have you instructor verify your installation.--------------------------